rev.2.00, jul.16.2004, page 1 of 5 HD151005 octal inverter buffers/drivers with open drain high voltage outputs rej03d0297?0200z (previous ade-205-594 (z)) rev.2.00 jul.16.2004 description the HD151005 features octal inverter buffers and drivers with open drain high voltage outputs with n channel power mosfet. features ? wired connection available with open drain outputs ? output voltage: 30 v max ? output current: 100 ma max ? ensures v ol 0.4 v when the output current is 48 ma ? low power dissipation: 10 a ? ordering information part name package type package code package abbreviation taping abbreviation (quantity) HD151005p dilp-20 pin dp-20n, -20nev p ? HD151005fpel sop-20 pin (jeita) fp-20dav fp el (2,000 pcs/reel) note: please consults the sales office for the above package availability. pin arrangement (top view) 1 2 3 4 5 6 7 oea a1 a2 a4 8 b1 b2 15 14 13 16 v cc ya1 ya2 ya3 yb1 yb2 yb3 a3 9 10 12 yb4 11 gnd 17 18 19 20 ya4 b3 b4 oeb
HD151005 rev.2.00, jul.16.2004, page 2 of 5 function table inputs outputs inputs outputs oea a ya oeb b yb hl z hl z hhl hhl lxzlxz h : high level l : low level z : high impedance x : irrelevant absolute maximum ratings (ta = 25c) item symbol ratings unit supply voltage v cc 0.5 to 7.0 v input voltage v in ?0.5 to v cc + 0.5 v input current i in ?10 to +0.1 ma output voltage v out -0.5 to +30 v output current i out +100 ma/unit power dissipation p t 835 (fp), 1375 (dp) mw storage temperature range tstg ?65 to +150 c note: 1. the absolute maximum ratings are values which must not individually be exceeded, and furthermore, no two of which may be realized at the same time. recommended operating conditions item symbol min typ max unit supply voltage v cc 4.5 5.0 5.5 v input voltage v in 0?v cc v output voltage v out ??24v output current i ol 0 48 100 ma operating temperature topr 0 25 70 c input voltage v ih 0.7 v cc ??v v il ??0.3 v cc v input rise and fall time * 1 t r , t f 0 ? 500 ns note: 1. this item guarantees maximum limit when one input switches. waveform: refer to test circuit of switching characteristics. electrical characteristics (ta = 0 to +70c) item symbol v cc (v) min max unit conditions output voltage v ol1 4.5 ? 0.2 v i ol = 24 ma, v i = v ih v ol2 4.5 ? 0.4 v i ol = 48 ma, v i = v ih v ol3 4.5 ? 0.8 v i ol = 100 ma, v i = v ih output current i o 5.5 ? 5 a v o = 30 v, v i = 0 v i o(off) 0?5av o = 30 v input voltage v ih 5.0 3.5 ? v v o = 0.4 v, i o 48 ma v il 5.0 ? 1.5 v v o = 30 v, i o 5 ma input current i i 5.5 ? 1 a v i = 0 v or v cc i i(off) 0?1av i = 5.5 v power supply currrent i cc 5.5 ? 10 a v i = 0 v or v cc , no load
HD151005 rev.2.00, jul.16.2004, page 3 of 5 switching characteristics (ta = 25c, v cc = 5 v) item symbol min typ max unit conditions propagation delay time t zl ? 15 30 ns see next page t lz ? 20 30 ns see next page transition time t thl ? 10 30 ns see next page t tlh ? 15 30 ns see next page input capacitance c in ? 7 15 pf see next page power dissipation capacitance c pd ? 30 ? pf see next page test circuit pulse generator z = 50 out ? input v cc c 15 pf l v cc output r 100 l ? note: 1. c l includes probe and jig capacitance. waveforms-1 a , b oea, oeb 10 % 90 % t r t f 90 % 0 v 5 v 10 % t zl t lz 50 % v cc v ol output y 50 % 50 % 50 % 90 % 10 % 10 % 90 % t thl t tlh notes: 1. t r = 5 ns, t f = 5 ns 2. input waveforms: prr = 1 mhz, duty cycle 50%
HD151005 rev.2.00, jul.16.2004, page 4 of 5 package dimensions package code jedec jeita mass (reference value) dp-20n ? conforms 1.26 g 0.51 min 2.54 min 5.08 max 7.62 0.25 + 0.11 ? 0.05 2.54 0.25 0.48 0.10 24.50 25.40 max 0.89 1.30 6.30 7.00 max 1 10 11 20 0 ? ? 15 ? 1.27 max as of january, 2003 unit: mm package code jedec jeita mass (reference value) dp-20nev ? conforms 1.26 g 0.51 min 2.54 min 5.08 max 7.62 *0.25 0.06 2.54 0.25 *0.48 0.08 *ni/pd/au plating 24.50 25.40 max 0.89 1.30 6.30 7.00 max 1 10 11 20 0 ? ? 15 ? 1.27 max unit: mm
HD151005 rev.2.00, jul.16.2004, page 5 of 5 package code jedec jeita mass (reference value) fp-20dav ? conforms 0.31 g *ni/pd/au plating *0.40 0.06 0.12 0.15 m 20 10 1 *0.20 0.05 0.80 max 11 12.6 5.5 2.20 max 13 max 0 ? ? 8 ? 0.70 0.20 + 0.20 ? 0.30 7.80 1.27 0.10 0.10 1.15 as of january, 2003 unit: mm
keep safety first in your circuit designs! 1. renesas technology corp. puts the maximum effort into making semiconductor products better and more reliable, but there is a lways the possibility that trouble may occur with them. trouble with semiconductors may lead to personal injury, fire or property damage. remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placeme nt of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap. notes regarding these materials 1. these materials are intended as a reference to assist our customers in the selection of the renesas technology corp. product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to renesas t echnology corp. or a third party. 2. renesas technology corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. 3. all information contained in these materials, including product data, diagrams, charts, programs and algorithms represents i nformation on products at the time of publication of these materials, and are subject to change by renesas technology corp. without notice due to product improvement s or other reasons. it is therefore recommended that customers contact renesas technology corp. or an authorized renesas technology corp. product distrib utor for the latest product information before purchasing a product listed herein. the information described here may contain technical inaccuracies or typographical errors. renesas technology corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies o r errors. please also pay attention to information published by renesas technology corp. by various means, including the renesas techn ology corp. semiconductor home page (http://www.renesas.com). 4. when using any or all of the information contained in these materials, including product data, diagrams, charts, programs, a nd algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. renesas technology corp. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. 5. renesas technology corp. semiconductors are not designed or manufactured for use in a device or system that is used under ci rcumstances in which human life is potentially at stake. please contact renesas technology corp. or an authorized renesas technology corp. product distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerosp ace, nuclear, or undersea repeater use. 6. the prior written approval of renesas technology corp. is necessary to reprint or reproduce in whole or in part these materi als. 7. if these products or technologies are subject to the japanese export control restrictions, they must be exported under a lic ense from the japanese government and cannot be imported into a country other than the approved destination. any diversion or reexport contrary to the export control laws and regulations of japan and/or the country of destination is prohibited. 8. please contact renesas technology corp. for further details on these materials or the products contained therein. sales strategic planning div. nippon bldg., 2-6-2, ohte-machi, chiyoda-ku, tokyo 100-0004, japan http://www.renesas.com renesas technology america, inc. 450 holger way, san jose, ca 95134-1368, u.s.a tel: <1> (408) 382-7500 fax: <1> (408) 382-7501 renesas technology europe limited. dukes meadow, millboard road, bourne end, buckinghamshire, sl8 5fh, united kingdom tel: <44> (1628) 585 100, fax: <44> (1628) 585 900 renesas technology europe gmbh dornacher str. 3, d-85622 feldkirchen, germany tel: <49> (89) 380 70 0, fax: <49> (89) 929 30 11 renesas technology hong kong ltd. 7/f., north tower, world finance centre, harbour city, canton road, hong kong tel: <852> 2265-6688, fax: <852> 2375-6836 renesas technology taiwan co., ltd. fl 10, #99, fu-hsing n. rd., taipei, taiwan tel: <886> (2) 2715-2888, fax: <886> (2) 2713-2999 renesas technology (shanghai) co., ltd. 26/f., ruijin building, no.205 maoming road (s), shanghai 200020, china tel: <86> (21) 6472-1001, fax: <86> (21) 6415-2952 renesas technology singapore pte. ltd. 1, harbour front avenue, #06-10, keppel bay tower, singapore 098632 tel: <65> 6213-0200, fax: <65> 6278-8001 renesas sales offices ? 200 4. re nesas technology corp ., all rights reser v ed. printed in ja pan. colophon .1.0
|
